3D Printer based on opensource Makerbot Replicator 3D Printer.
Freebies Included: 2 × 1kg 1.75mm Filament Included for FREE SD Card for FREE Live Support FREE Warranty FREE UK Plug FREE Required Software FREE Connect over USB and hit print – the machine will calibrate itself and start printing.
The printer connects to your computer via a standard USB cable thanks to a USB chip on the motherboard. When you hit print, the machine will automatically home itself, heat up, and begin printing.
All you have to do is sit back and relax while your printer does all the work. Living in the future is awesome. All the electronics are inside, so you don’t have wires dangling everywhere. Very easy to compile and use!
Access thousands of premade designs, ready for you to download and print! Whether it is iPhone case, cup, door stop, lego, mini statue, stand, bottle, shoe, anything you can imagine! Mechanical Properties Overall dimensions: 320 × 466 × 382 mm | 12.6 × 18.4 × 15 in Shipping Weight: 32 lbs
Linear ball bearings Precision ground 8mm shafts Snap-on, snap-off carriage assemblies Electronic Properties Duplicator 4 single-piece motherboard 5 axis, 1/16 micro-stepping motor control 4×20 LCD character display and multi-direction control pad Piezoelectric buzzer Universal Power Supply: 220-250V, 50/60Hz, 4.0A (input), and takes standard IEC cable
Software: REPLICATORG Compatibility: Linux, OSX, and Windows Print from SD card or over USB Input file type: STL, gcode Features Build envelope 225 × 145 × 150 mm | 8.9 × 5.7 × 5.9 in Build volume About 5 liters Layer thickness Choose 0.1-0.5 mm which is adjustable by software Stock nozzle diameter Stock 0.4 mm Speed 40 mm/s Flow Rate Approximately 24 cc/hr Extruder Temperature Recommended Maximum 230 C Heated Build Platform 120 C Maximum Positioning precision 2.5 micron on Z axis 11.micron on XY axis Materials Works with ABS, PLA and other materials Filament diameter: 1.75 mm