Real reviews, from customers like you

  1. Home >
  2. All products >
  3. Computer Components >
  4. Kingston KVR16E11K4/32I 32GB >

Real reviews, from customers like you

prices reviews ask info

Kingston KVR16E11K4/32I 32GB reviews

ValueRAM’s KVR16E11K4/32I is a kit of four 1G x 72-bit (8GB) DDR3-1600 CL11 SDRAM (Synchronous D... See full description.

Product Information

product description

ValueRAM’s KVR16E11K4/32I is a kit of four 1G x 72-bit (8GB)

DDR3-1600 CL11 SDRAM (Synchronous DRAM) 2Rx8, ECC, Intel Compatibility Tested, memory modules, based on eighteen 512M x 8-bit FBGA components per module.
Total kit capacity is 32GB. The SPDs are programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. Each 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES
JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• On-DIMM thermal sensor (Grade B)
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
PCB : Height 1.180” (30.00mm), double sided component